Floor Sanding in Dallas

For every wood flooring specialist, mastering the use of a floor buffer is a must-have skill. By smoothing the floor and erasing any irregularities left by the drum floor sander or belt floor sander and edger, buffing, the final stage of the wood floor sanding sequence, is aimed to provide a surface suited for the final coating.

Level Up Your Flooring Today, Message us!

Who We Are

Opening Hours: Mon-Fri 9AM - 6PM
Address: 401 Tom Landry Hwy, Dallas, TX 75260

Floor Sanding in Dallas

Floor Sanding in Dallas TX

Floor Sanding in Dallas

For its lifetime, a wood floor can be sanded seven times, according to experts. As a result, sanding is a critical step, as a poorly done job can drastically limit the lifespan of your floor. We ensure that at your Floor Sanding in Dallas, we treat your floors as if they were our own. We will sand your wood floors with the same care we would use on our own. As a result, we make all essential efforts to ensure that your floors are sanded per industry standards.

Sanding a Wooden floor: The steps for sanding, staining, and varnishing a wood floor are outlined here.
To avoid damaging the flooring, the room's edges and walls’ bottoms, Floor Sanders in TX must use the proper equipment. A large sander, a small sander, a polisher, an orbital sander, a belt sander, an edger, adequate extension cords, sandpaper with different grains, a shop vacuum, a mop, the chosen stain, the appropriate finishing product, brushes and rollers, and clothes, a mask, gloves, closed-toed shoes, a mask, gloves,


Prepping Up
Before you act on, you must remove all of the furniture and, in some cases, the moldings off the sanding surface to ensure that they are saved. After that, vacuum the floor entirely and clean it with a hardwood-specific cleaner. The cleaning is designed to eliminate any grease, wax, glue, or other residues that you don't want on the floor. It's also vital to correct any uneven or rough areas. If a wooden slat has been nicked, split, or punctured, it must be replaced to make the floor level. There should be no nails or screws protruding from the entire area to be sanded.



Sanding
The quantity of time you spend sanding the floor depends on its condition. The amount of work required is influenced by several factors, including the thickness of the varnish, the type of wood, the age of the floor, and any damage it may have experienced. Sanding a prefinished floor, for example, necessitates extra effort because the protective layer installed at the factory must be removed. In general, you can start sanding with a big sander in the majority of the room, leaving a 5 to 6-inch blank space along the walls. Coarser sandpaper might be used for the initial sanding. Always sand in the parallel of the grain of the wood, Sanding Hardwood Floors Dallas explains.


Put the varnish on.
After you've finished sanding and staining the floor, it is time to apply the varnish to protect it. Choose the varnish based on how frequently the bottom is used: do the floors belong to a family with two or three children? Do you have any pets at home? Do you throw a lot of parties? Do you put your shoes inside? Do you live in a condo by yourself? Do you move heavy loads regularly? Etc. All of these inquiries will help you figure out what kind of finish you will need. Floor Sanding Dallas recommends at least two coats of varnish if there is a lot of foot traffic within the house and if you have any more animals.


Interested To Know More? Connect With Your Floor Sanding in Dallas Today!
Floor Sanding Dallas knows the best methods for bringing your wood floors back to life like the backs of their hands. We respect each stage of the floor sanding process and understand how to do all of the essential measures – carefully and painstakingly – to ensure that the result meets your expectations!



Contact Us

Opening Hours: Mon-Fri 9AM - 6PM
Address: 401 Tom Landry Hwy, Dallas, TX 75260